상품정보

  • 측정 범위: Direct Replacement
  • car model 4: For VW POLO Golf BORA
  • 선형: 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
  • 히스테리시스: Upstream, Sensor 1, Front, Pre Cat.
  • 해상도: 036906262J
  • 유형: 난방 유형
  • OEM NO.: 036906262G 234-5430
  • 감도: Upstream & Downstream Oxygen Sensor 1 Sensor 2
  • 원산지: 중국
  • 힌트 관련 화학: 없음
  • 센서 유형: 압전


Replaces OEM Part Number:

036906262G  234-5430 


Fit for:
For Audi A2 1.4L 55KW 2000-2005
For Audi A3 1.6L 75KW 2003-2012

For SEAT ALTEA (5P1,5p5, 5p8) 2004-2012
For SEAT AROSA (6H) 1.4 16V 2000-2004 AFK, AQQ, AUB 1390 74 Hatchback
For SEAT CORDOBA (6L2, 6K2) 1.4 16V 2002-2007 BBY,BKY 1390 55 Saloon
For SEAT CORDOBA (6L2, 6K2) 1.4 16V 2002-2009 AUB,BBZ 1390 74 Saloon
For SEAT IBIZA III (6L1) 1.4 16V 2002-2007 BBY,BKY 1390 55 Hatchback
For SEAT IBIZA III (6L1) 1.4 16V 2002-2009 AUB,BBZ 1390 74 Hatchback
For SEAT LEON (1M1) 1.6L 77KW 2000-2006

For Skoda FABIA I (6Y2) 1.4 16V 1999-2008 AUA, BBY, BKY 1390 55 Hatchback
For Skoda FABIA I (6Y2) 1.4 16V 1999-2008 AUB,BBZ 1390 74 Hatchback
For Skoda FABIA I Combi (6Y5) 1.4 16V 2000-2007 AUB,BBZ 1390 74 Estate
For Skoda FABIA I Combi (6Y5) 1.4 16V 2000-2007 AUA, BBY, BKY 1390 55 Estate
For Skoda FABIA I Saloon (6Y3) 1.4 16V 1999-2007 AUA, BBY, BKY 1390 55 Saloon

For VW POLO (6N1, 6N2) 1.4L 1996/04-2001/09
For VW POLO (9N_) 1.4 16V  AUA  1390  55  4  Hatchback  2001-2008
For VW POLO (9N_) 1.4 16VAUB  1390  74  4  Hatchback  2001-2008
For VW POLO Saloon (9A4, 9A2, 9N2) 2002/09-
For VW POLO Saloon (9A4, 9A2, 9N2) 1.4  BBY  1390  55  4  Saloon  2003-
For VW POLO Saloon (9A4, 9A2, 9N2) 1.4  BBZ  1390  74  4  Saloon  2003-
For VW Golf BCB ENGINE 2004-2005
For VW Golf   AZD   1998-2001
For VW Bora BCB, AZD 2000-2005
 

Package included:

1* Oxygen Sensor



Note:

 1. Please check OEM number before purchasing.

2. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.

3. Monitors are not calibrated same, item color displayed in photos may be showing slightly

different from the real object. Please take the real one as standard.
 

Must Know Before Buying:

 

 A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to

changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.

Use a 10-megaohm digital voltmeter. Hook up the voltmeter`s red probe to the sensor`s signal wire

and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good

sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or

3 minutes.

Please take a video clip of the voltmeter and contact us if our sensor:

Goes above range between 0.1 and 0.9 volt

Remains below 0.5 volts

Stays fixed at a particular voltage

You`re free to choose replacement or refund if our sensor fails to work, in this case.